janitza UMG 806, User Manual And Technical Data

Page: 12 / 92

12
UMG 806 www.janitza.com
2. Safety
The chapter on Safety contains information which
must be observed to ensure your personal safety
and avoid material damage.
2.1 Display of warning notices and safety
information
The warning notices shown below
·are found throughout all of the documentation,
·can be found on the devices themselves.
·indicate potential risks and hazards,
·underscore aspects of the information provided
that clarifies or simplifies procedures.
The additional symbol on the device itself indicates
an electrical danger that can result in serious inju-
ries or death.
This general warning symbol draws attention to a
possible risk of injury. Be certain to observe all of
the information listed under this symbol in order to
avoid possible injury or even death.
2.2 Hazard levels
Warning and safety information is marked by a
warning symbol, and the hazard levels are shown
as follows, depending on the degree of hazard:
DANGER
Warns of an imminent danger which, if not avoided,
results in serious or fatal injury.
WARNING
Warns of a potentially hazardous situation which, if
not avoided, could result in serious injury or death.
CAUTION
Warns of an immediately hazardous situation
which, if not avoided, can result in minor or moder-
ate injury.
ATTENTION
Warns of an immediately hazardous situation which,
if not avoided, can result in material or environmen-
tal damage.
INFORMATION
Indicates procedures in which there is
no
hazard of
personal injury or material damage.