janitza UMG 806, User Manual And Technical Data

Page: 61 / 92

61
UMG 806 www.janitza.com
13.2 Installing the modules
Install the module in switchboard cabinets or small
distribution boxes according to DIN 43880 (any
mounting orientation possible) on a 35 mm (1.38")
DIN rail as follows:
Fig. Device on DIN rail.
DIN rail
Bottom locking mechanism
Module clip fastener
(for locking the UMG to
module connection)
1. Remove the protective sticker on the side of
the UMG 806.
2. Remove the module clip fasteners on the top
and bottom - if present.
3. Plug in the module (the plug is recessed on the
side of the UMG, the socket is on the module).
4. Check the connection of the UMG to the mod-
ule!
Module
clip fastener
5. Lock the device together with the module at the
top and bottom with the module clip fasteners.
6. The UMG 806 can be combined with one
806-EC1, 806-EI1 or 806-ED1.