Figure 1.
Typical AquaPure and PureLink Installation
Example With Options ........................... 8
Figure 2a. Wiring Diagram for the PureLink
TM
System
with a 240 VAC Filter Pump .................. 10
Figure 2b. Wiring Diagram for the PureLink System
with a 120 VAC Filter Pump .................. 11
Figure 2c. Wiring Diagram for the AquaPure
System ................................................. 12
Figure 3.
Chlorine Generator Cell and Sensor
Orientation with Flow Direction ............. 13
Figure 4.
Recommended Plumbing Configuration
for Pool/Spa Combination Systems ...... 14
Figure 5.
Recommended Plumbing Configuration
for Pool or Dual Equipment Systems .... 14
Figure 6.
Removing the Control/Power Center
Mounting Brackets from Shipping
Position ................................................. 15
Figure 7.
Mark Holes using Control/Power
Center Mounting Bracket ...................... 15
Figure 8.
Reinstall Mounting Brackets on
Control/Power Center ............................ 16
Figure 9.
Chlorine Generator Power
Interface Board ...................................... 17
Figure 10. Installation of the User Interface ........... 17
Figure 11. Cell Installation and Flow/Temp/Salinity
Sensor ................................................... 22
Figure 12. Pipe Cutout ........................................... 23
Figure 13. Pipe Cutout (Option 3 - Replace 2-Port
Cell and Piping and treat as New
Installation) ............................................ 23
Figure 14. Power Connection between AquaPure
Control Center and AquaLink Power
Center ................................................... 24
Figure 15. Communication Connection between
AquaPure Control Center and AquaLink
Control System ...................................... 24
Figure 16a. Wiring a PureLink
Control System
Network ................................................. 25
Figure 16b. Wiring a PDA
Control System Network.. 25
Figure 17. Movable ORP Jumper J14 .................... 26
Figure 18. User Interface ........................................ 32
Figure 19. Spool Piece Location ............................ 40
Figures
Figure 20a. AquaPure Control Center ...................... 46
Figure 20b. PureLink Power Center, 6614AP ........... 47
Figure 20c. PureLink Power Center, 6613AP ........... 47
Figure 21. 3-Port Electrolytic Cell and Sensor
Exploded View (Universal Unions) ........ 48
Figure 22. 3-Port Spool Exploded View ................. 48
Figure 23. 3-Port Electrolytic Cell and Sensor
Exploded View (2” PVC Unions) ........... 49
Figure 24. 3-Port Spool Exploded View .................. 49
Table 1. Option Selection Tool ................................ 20
Table 2. Approximate Kilograms (Pounds)
of Salt Needed to Obtain 3.0 gpl
(3,000 PPM) in Pool .................................. 31
Tables
Page 3
ENGLISH
Page 3
ENGLISH
Jandy
®
AquaPure
®
/PureLink™ Power Center and Cell Kit
|
Installation and Operation Manual
