Section 8.
Temperature Conversion
To display Celsius or Fahrenheit on the digital display.
1. Press and hold button
POOL TEMP -BOOST-
(D)
for 15
seconds (third beep).
2. Within 5 seconds, momentarily press
SALINITY
(C)
to enter
the Fahrenheit/Celsius change mode.
3. To toggle between Celsius and Fahrenheit, press
down
arrow
(A)
or
up arrow
(B)
4. Confirm by momentarily pressing
SALINITY
(C)
. The
change will be stored in permanent memory.
NOTE:
The Boost mode will normally be activated if the
POOL TEMP -BOOST-
(D)
button is depressed for 10
seconds. However, if button
(D)
is held down an additional 5 seconds (for the third beep), the state of the
Boost mode will not be changed.
Page 45
ENGLISH
Page 45
ENGLISH
Jandy
®
AquaPure
®
/PureLink™ Power Center and Cell Kit
|
Installation and Operation Manual
