Installation
6-9
WMX SERIES DIMMER
OPERATING
MANUAL
6.5
Wall mounting dimmers - Conduit cable entry
Use both the shallow wall mount bracket (supplied) and optional extended mounting
bracket (JND-WM-EBP) to form an enclosure. Place the deep bracket over the shallow
bracket, so that the tags in the back of the deep plate fit into the mating slots in the
shallow bracket, noting the orientation marks on both pieces. Use four thread-cutting
screws (supplied) at each side to screw the two pieces together, forming an 80mm deep
enclosure. The enclosure formed has an assortment of holes to suit 25mm and 32mm (1"
and 1-1/4") conduit end nuts on all four sides.
Place the assembly against the wall at the desired location, and mark and drill holes for
at least 4 fixing points. Mount the enclosure on the wall.
Attach the dimmer to the bracket as described in Section 6.6.
Figure 6.5: Wall Mounting A Wall Mount Dimmer With Conduit Cable Entry
Summary of Contents for WMX
Page 1: ...WMX...