Installation
6-7
WMX SERIES DIMMER
OPERATING
MANUAL
6.3
Wall mounting dimmers - Flush to wall
Remove the cable access blanking piece of the wall mounting bracket by cutting the
holding webs with shears. De-burr the metal. Feed any cables (supply, output, and
control) through this cable access cutout, and place the bracket against the wall,
orienting the bracket as indicated on the bracket. Mark and drill at least 4 fixing points,
and attach the bracket to the wall.
Attach the dimmer to the bracket as described in Section 6.6.
Figure 6.3: Wall Mounting A Wall Mount Dimmer
Summary of Contents for WMX
Page 1: ...WMX...