Installation
6-6
WMX SERIES DIMMER
OPERATING
MANUAL
6.2
Wall mounting dimmers - In racks
Both the wall and the extended mounting bracket may be attached to standard 19" rack
strips. The bracket is screwed to the rack strip using standard cage nuts and screws (not
supplied).
Supply cable entry may be via a 32mm gland hole at the bottom right of the main
chassis, or by removing the links from one of the partially notched holes in the rear face
of the dimmer chassis and the shallow wall mounting bracket. If the 32mm hole is not
used for cable access it should be coved with the blanking plug provided.
Attach the dimmer to the bracket as described in Section 6.6.
Figure 6.2: Rack Mounting A Wall Mount Dimmer
Summary of Contents for WMX
Page 1: ...WMX...
