Maintenance
7-1
WMX SERIES DIMMER
OPERATING
MANUAL
7.0 Maintenance
With care, the WMX dimmer will require little or no maintenance.
WARNING
DO NOT ALLOW THE ENTRY OF LIQUIDS OF ANY SORT INTO THE
DIMMER CHASSIS.
EXTERNAL CLEANING:
If the front panels require cleaning, wipe with a mild detergent on a damp soft cloth.
DO NOT spray liquids onto the front panels.
DO NOT use solvents for cleaning the front panels.
INTERNAL CLEANING:
The WMX dimmer will require little internal maintenance other than periodic flushing
of dust build up to prevent the fan and air-path becoming clogged with dirt or fluff.
•
ISOLATE POWER to the dimmer (by disconnecting the power cable or
locking off the mains supply isolator)
•
Remove the front panels
•
Blow clean the fan and internals with compressed air
•
DO NOT "spin" the fan with compressed air - the blades may break off
•
When the fan and internals are clean, replace the front panels and screws, then
re-connect the power cable
ROUTINE MAINTENANCE:
WMX dimmers should be routinely checked and maintained at six- to twelve-month
periods.
The maintenance routine should include:
•
Inspection of chassis for evidence of impact damage and physical abuse
•
Inspection of outlets for wear and damage
•
Inspection of power cable for wear and damage
•
Electrical checking of ground integrity from power cable to chassis
•
Electrical checking of ground integrity from power cable to outlet grounds
•
Flushing of dust build up
•
Testing the operation of all front panel switches and breakers
Summary of Contents for WMX
Page 1: ...WMX...
