Installation
6-8
WMX SERIES DIMMER
OPERATING
MANUAL
6.4
Wall mounting dimmers - Straddling cable trays
The optional extended mounting bracket (JND-WM-EBP) will straddle cable trays up to
420mm wide and 75mm deep. Remove the top blanking piece by cutting the holding
webs with shears, and remove the eight screws securing the bottom blanking piece. De-
burr the metal. Position the bracket over the cable tray against the wall, orienting the
bracket as indicated on the bracket. Mark and drill at least 4 fixing points, and attach the
bracket to the wall. Feed any cables (supply, output, and control) through the cable
access cutout.
Attach the dimmer to the bracket as described in Section 6.6.
Figure 6.4: Wall Mounting A Wall Mount Dimmer Over Cable Tray
Summary of Contents for WMX
Page 1: ...WMX...
