Using
the
fixture
controls
About
the
console
controls
Shift
Press the Shift button and adjust a Hue Control to fan the colours of all
selected fixtures. The fan effect will depend on the Hue control you adjust, for
example:
If you have all 12 fixtures selected and adjust the Hue control on Channel 1 the
fan will spread from Channel 12, which does not change colour, to the colour you
set on Channel 1.
If you adjust the Hue control on Channel 6 the fan will spread from Channel 1
and Channel 12, which do not change colour, inwards to Channel 6.
Â
If you make a mistake while setting colours press the Undo button to revert
to the previous setting.
Page
In Scene mode (see below) Stage CL can store up to 7 pages of Scenes (or
Chases) to the twelve Fixture faders. To switch between pages press the page
button. The LED indicates the 7 pages – p age 1 – Yellow, page 2 Red, page 3,
Green, page 4 Blue, page 5 Magenta, page 6 Cyan, page 7 White.
Â
lable in the Preferences tab of the Setup window.
See Preferences
on page 11-3
The default for Stage CL is to only show 4 pages. You can adjust the number
of pages avai
Snapshot
(aka
Hold
or
Freeze)
Press this button to take a ‘snapshot’ of the console output and hold that
output until the button is pressed again. Only the Grand Master and DBO
controls have an effect on the Snapshot output.
e
you press the snapshot button again and Stage CL crossfades to the new
look.
This means you can take a snapshot then adjust any other controls, including th
fixture control without affecting the look on stage. Once you’ve got a new look
ready
Fixtures
‐
Scenes
This button switches the 12 sets of fixture control to ‘Scene mode. In Scene
mode the 12 faders and flash buttons can be used to record and play back scenes.
In Scene mode the LED in the Fixture / Scene button lights up in Red
For more information about recording scenes
see Recording a Scene on page 7-1.
5
‐
4
Stage
CL
User
Guide,
Version
0.4