![background image](http://html2.mh-extra.com/html/jai/gox-5105m-pge/gox-5105m-pge_user-manual_3228013089.webp)
User Manual (Ver. 1.0) - Main Functions
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 89 -
Caution:
Due to the Xscale's limitations, the H (Width) value must be 8n-4 (n: integer) and
the V (Height) value must be 2n-2 (n: integer). If you enter another value, "NG" (no good) is
displayed.
4. The ROI and scaling factor values are displayed in the blue output boxes.
5. Now configure the new camera (GOX-5105C). In ImageFormatControl, set
Width
to
2432
and
Height
to
1514
.
Note:
If the specified ROI is larger than the supported resolution of the replacement camera,
you will need to switch to a replacement camera with a higher resolution.
6. Set
ImageScalingMode
to
On
, and set
ImageScalingHorizontal
and
ImageScalingVertical
to
0.794203
.
Note:
ImageScalingHorizontal and ImageScalingVertical can be set up to 6 decimal places,
but eBUS Player may automatically round the value and display a different value.
7. Now the new camera's virtual pixel size is 3.45 μm x 3.45 μm, and the output image size is 1924
x 1200.
Example 3
Calculate the scaling factors needed for a GOX-20405C-PGE with 4512 x 4512 resolution to output a
scaled image with a resolution of 3004 x 3004.
The scaling ratio in this example can be easily obtained using Option 1 on the Xscale calculator.
1. Open the
Option 2
tab on the Xscale Calculator.
2. Enter the camera's resolution
4512
in the H and V boxes in the Original resolution (Full or ROI).