![background image](http://html2.mh-extra.com/html/jai/gox-5105m-pge/gox-5105m-pge_user-manual_3228013040.webp)
User Manual (Ver. 1.0) - Main Functions
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 40 -
Number of Frames That Can Be Acquired in Burst Trigger Mode
In BurstTrigger mode, all acquired frames cannot be output because the maximum frame rate for
BurstTrigger mode is higher than the GigE bandwidth frame rate. Therefore, the number of frames that
can be acquired in BurstTrigger mode is defined by the number of frames that can be stored in the
camera's internal memory.
The number of frames that can be acquired depends on the model and SensorDigitizationBits setting.
For example, if you are using GOX-5105C-PGE and
is set to 10Bits, the
maximum number of frames that can be acquired is 32.
Note:
The number of frames in the table below are fixed values, regardless of the ROI size.
SensorDigitizationBits
8Bits
10Bits
12Bits
GOX-5105MC-PGE
32 frames
32 frames
27 frames
GOX-8105MC-PGE
24 frames
19 frames
16 frames
GOX-12405MC-PGE
16 frames
13 frames
11 frames
GOX-16205MC-PGE
13 frames
10 frames
8 frames
GOX-20405MC-PGE
10 frames
8 frames
6 frames
GOX-24505MC-PGE
8 frames
7 frames
5 frames
Number of Frames That Can Be Acquired
Burst Trigger Mode Usage Examples
Burst Trigger Mode usage examples are shown below:
Example 1: Use MultiFrame Mode with AcquisitionStart Trigger
In this example, the number of frames to be acquired is defined by
AcquisitionFrameCount
, and the
frame rate is defined by
AcquisitionFrameRate
.
Settings:
l
AcquisitionMode = MultiFrame
l
AcquisitionFrameCount = Any (see
Limitations
)
l
TriggerMode[FrameStart] = Off
l
TriggerMode[AcquisitionStart] = On
Limitations
: For the frame count limitations, see the table above.