![background image](http://html2.mh-extra.com/html/jai/gox-5105m-pge/gox-5105m-pge_user-manual_3228013092.webp)
User Manual (Ver. 1.0) - Main Functions
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 92 -
How to Configure
1. Set
GradationCompressionMode
to
On
to enable the function.
2. Select a value for
GradationCompression1stKneePoint
to indicate where to start applying
compression on the intensity values coming from the sensor. The knee point is specified as a
percentage of the maximum digital value of the 8-bit compressed output (255).
3. Select a value for
GradationCompression1stGain
in order to set the slope angle at the first
knee point. Available values range from 0 dB (no compression) to -66 dB.
4. Use
GradationCompression2ndKneePoint
and
GradationCompression2ndGain
to define
an additional compression segment.
Note:
2ndKneePoint must be specified with a value greater than 1stKneePoint. The
maximum value is 200% when
is set to 10Bits, and 800% when
SensorDigitizationBits is set to 12Bits.
Examples
The following examples show how Gradation Compression knee points and gain can be calculated
and applied.
= 10Bits