![background image](http://html2.mh-extra.com/html/jai/gox-5105m-pge/gox-5105m-pge_user-manual_3228013143.webp)
User Manual (Ver. 1.0) - Setting List
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 143 -
Blemish Control Item
Setting
Range
Default
Value
Description
BlemishCompensation
PositionY
-
-1
Display the Y coordinate (vertical pixel position) of the target blemish
selected in BlemishCompensationIndex. You can also manually enter the Y
coordinate of the blemish you want to correct.
Min
: -1
Max
: HeightMax - 1
BlemishCompensation
DataClear
-
-
Delete detected or specified blemish information selected in
BlemishCompensationIndex.
BlemishCompensationNumber
0
~
2000
0
Display the number of target blemishes.
SequencerControl
Configure sequencer settings.
Related Topic:
Note:
Refer to
Functions That Cannot Be Used Together
for usage restrictions.
Sequencer Control Item
Setting
Range
Default
Value
Description
SequencerMode
0: Off
1: On
0: Off
Enable/disable SequencerMode.
SequencerModeSelect
-
0
Select the sequencer mode.
0: TriggerSequencerMode (Default)
1: CommandSequencerMode
SequencerSetSelector
1
~
32
1
Select the index number to configure.
SequencerWidth
-
WidthMax
value
Set the width of the selected SequencerIndex.
Setting Range: 96
~
[WidthMax - OffsetX] , Step 8(4)*
*For monochrome models, when BinningHorizontal = 2, the value in
parentheses is applicable.
SequencerHeight
-
HeightMax
value
Set the height of the selected SequencerIndex.
Setting Range: 8 (4)*
~
[HeightMax - OffsetY], Step 2(1)*
*For monochrome models, when BinningVertical = 2 or
FD2x2BinningMode = On, the value in parentheses is applicable.
SequencerOffsetX
-
0
Set the horizontal offset value for the selected SequencerIndex.
Setting Range: 0
~
[WidthtMax - Width], Step 8(4)*
*For monochrome models, when BinningHorizontal = 2, the value in
parentheses is applicable.