![background image](http://html2.mh-extra.com/html/jai/gox-5105m-pge/gox-5105m-pge_user-manual_3228013094.webp)
User Manual (Ver. 1.0) - Main Functions
GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
- 94 -
Overlay Mode
Related Setting Items:
Note:
This function cannot be used with the
OverlayMode = MultiRoiAreaMode
In this mode, you can check the readout area when using the
. The area that
is not readout is displayed with the brightness reduced to half. This makes it possible to set and adjust
the readout area while checking the target area on the screen.
Notes:
l
To set Overlay Mode to
MultRoiAreaMode
, MultiRoiMode (
) must be set to
Off
in advance.
l
In the following scenario, OverlayMode = MultiRoiMode will be disabled (you can still set to
ALCAreaMode or AWBAreaMode): DecimationVertical/DecimationHorizontal = 2,
ImageScalingMode = On, BinningHorizontal = 2, BinningVertical = 2, FD2x2BinningMode =
On
OverlayMode = AWBAreaMode or ALCAreaMode
When Overlay Mode is set to
AWBAreaMode
or
ALCAreaMode
, you can check the photometry
areas of WhiteBalance and ALC. In the non-target area as shown below, the brightness is reduced to
half.
MultiRoiAreaMode
AWBAreaMode or ALCAreaMode