JAI GO-5000C-USB User Manual Download Page 16

Page: 16 / 70

GO-5000M-USB / GO-5000C-USB

- 14 -

6.3 Digital IN/OUT interface

In the GO-5000M-USB and GO-5000C-USB, the digital IN/OUT capability in the software control tool
can assign the necessary signals needed for the system.

6.3.1 Line Selector

In the Line Selector, the following input and output signals can be assigned.

Table – 4 Line selector

Note: Select and connect the line source signal against the item selected in the line selector.

6.3.2 Line Source

Line source signal can be selected from the following table to connect it to the line item

which is selected in the line selector.

Table – 5 Line Source

6.3.3 Line Mode

Indicates the status of the interface, input or output.

6.3.4 Line Inverter

Sets the polarity of the selected input or output.

6.3.5 Line Status

Indicates the status of the selected signal, input or output (True=High or False=Low)

Line Selector item

Description

Line 1 Opt 1 Out

Opt 1 output from #3 pin of DC In/Trigger 6-Pin on the rear

Line 2 Opt 2 Out

Opt 2 output from #4 pin of DC In/Trigger 6-Pin on the rear

NAND 0 In 1

First input at first NAND gate in GPIO

NAND 0 In 2

Second input at first NAND gate in GPIO

NAND 1 In 1

First input at second NAND gate in GPIO

NAND 1 In 2

Second input at second NAND gate in GPIO

Line Source item

Description

Low

Connect Low Level signal to line item selected in Line Selector,

Default setting

High

Connect High Level signal to line item selected in Line Selector

Acquisition Trigger Wait Connect Acquisition Trigger Wait signal to line item selected in Line Selector
Acquisition Active

Connect Acquisition Active signal to line item selected in Line Selector

Frame Trigger Wait

Connect Frame Trigger Wait signal to line item selected in Line Selector

Frame Active

Connect Frame Active signal to line item selected in Line Selector

Exposure Active

Connect Exposure Active signal to line item selected in Line Selector

FVAL

Connect FVAL signal to line item selected in Line Selector

PulseGenerator0 Out

Connect Pulse Generator 0 signal to line item selected in Line Selector

Line 5 Opt In

Connect Opt In 1 signal (line 5) to item selected in Line Selector

NAND 0 Out

Connect NAND 0 signal to line item selected in Line Selector

NAND 1 Out

Connect NAND 1 signal to line item selected in Line Selector

Summary of Contents for GO-5000C-USB







































































Search results

Summary of Contents for GO-5000C-USB

Reviews:

Related manuals for GO-5000C-USB

Brands by name

Popular brands

JAI GO-5000C-USB, User Manual

Search results

Summary of Contents for GO-5000C-USB

Reviews:

Related manuals for GO-5000C-USB

Brands by name

Popular brands