10
Q
To oversee connection of the building’s electrical supply, a
cable with a suitable cross-section, (
220-240 V ~:min. 4 mm2;
380-415 V 2N ~: min. 2.5 mm2
)
must be used.
The building's electrical supply must be equipped
with a differential switch with operating current
which does not exceed 30 mA.
Q
Frame shower enclosures have a terminal identified by the
symbol
, placed on the back of the frame for equipotential
connection of the surrounding metal masses (standard
EN
60335.2.105
).
Q
The appliance is equipped with an LED lighting system in
compliance with Norm
EN 62471:2009
, lamp classification
group: exempt.
Do not look directly at the light using optical devices (bin-
oculars, cameras, magnifying glasses).
ATTENTION! Before carrying out any maintenance
operations, disconnect the appliance from the power
supply line.
JACUZZI EUROPE S.p.A. denies all responsibility:
- If installation is carried out by unqualified personnel and/or per-
sonnel unauthorised to carry out the installation itself.
- If current norms and legal provisions regarding the electric sys-
tems of buildings in the country in which installation is carried out
are not complied with.
- If the instructions for installation and maintenance contained in
this manual are not followed.
- If unsuitable and/or uncertified materials are used for installa-
tion.
- If shower enclosures are placed in areas which do not comply with
the above-quoted standards.
- If incorrect operations are performed that reduce the level of pro-
tection of the electrical equipment against water jets, modify the
protection against electrocution due to direct or indirect contact,
or produce abnormal conditions of insulation, current leakage or
overheating.
- If any components or parts of the appliance are altered in rela-
tion to the original state when supplied, releasing the Manufacturer
from any liability.
- If the appliance is repaired by unauthorised personnel or if spare
parts are used other than the original ones supplied by Jacuzzi Eu-
rope S.p.A.
10
Summary of Contents for frame in2
