CONTROLS 6
en-36
6.2.17 WEIGHT TRANSFER KNOB _________________________________________________
The weight transfer knob adjusts the weight of the cutting units to increase or
decrease the mower traction. When you adjust the weight transfer knob, the lower
time of the cutting units will change and increase or decrease the ground pressure at
each tire.
Rotate the weight transfer knob to the left side to increase the cutting unit weight and
decrease the mower’s traction. The time needed for the cutting units to lower will
decrease.
Rotate the weight transfer knob to the right side to decrease the cutting unit weight
and increase the mower’s traction. The time needed for the cutting units to lower will
increase.
6.2.18 PANEL LATCH ___________________________________________________________
The panel latch holds the control panel closed while the mower is in operation. Rotate the latch
90° to open the panel to access the fuses and relays.
6.2.19 REVERSE ENGINE FAN SWITCH ____________________________________________
The reverse engine fan is an optional accessory. When the switch is pressed, the fan blades will rotate
to the reverse position to blow grass and other debris off the radiator screen. When the switch is
released, the fan blades will rotate to the normal operation position.
Press and hold the front of the reverse engine fan switch for 5 to 10 seconds to blow grass and other
debris off the radiator screen.
NOTICE
If the cutting unit weight is set too low, the wing cutting units will not lower to the
ground.
Summary of Contents for HR-9016 Turbo
Page 13: ...SPECIFICATIONS 4 en 12 K L D B A P P N C J H M E G...
Page 28: ...5 DECALS en 27...
Page 90: ...13 NOTES en 89 13Notes...
Page 91: ...NOTES 13 en 90...
