4 SPECIFICATIONS
en-15
4.7
SLOPES _________________________________________________________________
DO NOT USE ON SLOPES GREATER THAN TBD°. The 18.6° slope was calculated with static stability measurements
according to the requirements of BS EN ISO 5395-3.
4.8
CUTTING UNIT SPECIFICATION _____________________________________________
4.9
RECOMMENDED LUBRICANTS ______________________________________________
Engine Oil:
Must meet MIL-L-46152 or API Classification grades CJ-4
Hydraulic Fluid:
The standard hydraulic fluid is ISO VG68.
Grease:
Texaco Starplex 2EP Moly (NLGI Grade 2-EP Lithium Complex Grease containing Molybdenum Disulfide) or
equivalent
HR9016T
Blade Length
21 in. (53.3 cm)
Number of blades
Front Deck - 5
Left Wing Deck - 3
Right Wing Deck - 3
Height of cut
1 to 5-1/2 in. (2.5 to 14.0 cm)
Height of cut adjustment
1/2 in. (1.3 cm) spacers put on the top of or
below caster wheel housing.
Three position caster wheel mounting.
Clevis pins in various mounting positions.
Blade Tip Speed
@ 2400 rpm engine speed
278.7 feet/second (84.9 meters/second)
Temperature
Viscosity
Above 77° F (25° C)
SAE 30 or SAE 10W-30 or SAE 10W-40
32° to 77° F (0° to 25° C)
SAE 20 or SAE 10W-30 or SAE 10W-40
Below 32° F (0° C)
SAE 10W or SAE 10W-30 or SAE 10W-40
Summary of Contents for HR-9016 Turbo
Page 13: ...SPECIFICATIONS 4 en 12 K L D B A P P N C J H M E G...
Page 28: ...5 DECALS en 27...
Page 90: ...13 NOTES en 89 13Notes...
Page 91: ...NOTES 13 en 90...
