Electrical and Physical Properties:
Voltage:
12V
Weight:
145 lb (65.77 kg)
Battery Series:
12 Volt Sun Xtender Series
Cord Length:
7 ft T316 SS Sheathed
Self Discharge Rate:
1-3%/month - remains stable
over life.
Nominal Capacity Ampere Hours:
@ 25° C (77° F) to 1.75 Volts per cell
24 Hr Rate:
212Ah
48 Hr Rate:
235Ah
72 Hr Rate:
244Ah
PART NUMBER:
14285212
DESCRIPTION:
Core Manufacturer: Concord Corp.
Sun Xtender Solar Battery, VRLA-AGM Deep
Cycle Battery for Off Grid and Grid Tied Systems
CONSTRUCTION:
Thick walled polypropylene copolymer container
and sealed cover. PolyGuard protection used
around the positive plate and AGM prevents
shorting from shock and vibration. Sun Xtender
is the only battery offering this added layer of
protection. Recombinant gas Sun Xtender® Se-
ries solar batteries are valve regulated lead acid
(VRLA) batteries, providing explosion resistance.
APPROVALS:
UL 1989 (Standby Battery), File Number MH-
17983.Sun Xtender® Series batteries ship
Hazmat EXEMPT. Complies with 49 CFR
173.159a, DOT HMR49, ICAO and IATA, Special
Provisions S.P.A67 & A48.
4 PIN MALE FACE VIEW
4
3
1
2
1 - 12 AWG
Black
-12VDC Power
2 - 12 AWG
Green
Temperature Sensor
3 - 12 AWG
Red
Temperature Sensor
4 - 12 AWG
White
+12VDC Power
1
2
3
4
5
6
7
8
9
1.
Eliminates internal shorts caused by shock, vibration & dendrite growth.
2. Custom designed and manufactured to provide superior wicking
characteristics for electrolyte retention.
3. Insures long life, excellent cycling capability.
4. Massive “over-the-partition” weld increases the weld strength & provides
low resistance connection path.
5. Strong, epoxied tongue & groove cover/container seal will not separate
even under extreme temperature & pressure changes or vibration.
6. Operates in any orientation without leaking. Maintenance-free: never
requires water additions.
7. Easier handling, carrying & installation.
8. Provides low resistance electrical connection (copper-to-copper), non-
corrosive, increased environmental protection & personal safety- no
exposed lead.
9. High impact resistance and resists bulging even under severe overcharge
and temperature. Shock proof and freeze tolerant.
COPPER ALLOY
TERMINAL
LIFTING
HANDLES
REINFORCED COPOLYMER
POLYPROPYLENE CONTAINER
AND COVER
INTERCELL
CONNECTIONS
COVER TO
CONTAINER
SEAL
THICK PLATES
AND HIGH
DENSITY OXIDE
PASTE MATERIAL
ABSORBENT
GLASS MAT (AGM)
SEPARATOR
POLYETHYLENE
ENVELOPE
SEALED, PRESSURE
RELIEF SAFETY
VALVES
© 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | [email protected]
Technical Data Sheet
Sun Xtender Submersible Solar Battery
1566_10065_20201015
O&M_SB500PWc_10316_20210309a - 51
