Materials of Construction
- T316 stainless steel constructions.
Foam-filled high-density polyethylene (HDPE) floats.
Thermoplastic rubber intake hose. HDPE Strainer.
The SB500PWc is NSF/ANSI Standard 61 Listed,
includes NSF/ANSI 61, Annex G.
Power Supply/Control System -
Photovoltaic (PV) Solar Panel, Battery and Electronic Controller are mounted on rack
outside.
PV Solar Panels:
80-watt photovoltaic solar panel. Battery storage for day/night operation.
Electronic Controller:
Digital, solid-state controller, mounted in weather-tight (NEMA 4X) enclosure with
internally fused disconnect. SCADA output through RS-232 Serial Communication (Modbus RTU), DB9 male
connection point inside enclosure. Wireless options available, not included.
Wiring:
Corrosion-resistant industrial cord with molded watertight connectors that are indexed to prevent
improper wiring. Low voltage in reservoir, less than 36 VDC.
Technology Description-
Floating, solar powered, circulation equipment for potable water reservoirs. Day/night operation
on solar only by utilizing a battery to store excess daytime power for nighttime operation.
Figure 1:
SB500PWc
Patent Pending
Subject to change without notice.
Maintenance / Warranty
- Minimal maintenance. Limited 2-year parts and labor warranty.
Drive System
- High torque, direct drive (no gearbox), low voltage
brushless D.C. motor.
Minimum Operating Depth
- At depths below 2 feet (0.6 meters), the
impeller will be out of the water and the machine will stop circulating
water. No damage to machine if ran dry in shallow water.
Fluid Intake Assembly -
Intake hose banded to bottom of structural assembly.
Intake Hose :
20
to 100+ feet (6 to 30+ m) available in 6-inch (15.2 cm) diameter X 20 feet (6 m) sections.
Torque Bar, Chemical Injection:
Torque bar placed at bottom end of hose, positions open end of hose at bottom
floor of reservoir.
Rotating Assembly -
Removable assembly with easy access to impeller and impeller shaft.
Minimum Access Opening / Machine Size / Weight
- Machine can
be installed through 18 inch (46 cm) diameter opening. Assembled
machine is 8 feet (2.5 meter) in diameter and weighs 85 pounds
(40 kg). 16 inch (0.4 meter) headspace is required.
Flotation System
- Three floats in triangular pattern each with an
adjustable float arm for proper vertical positioning, total float buoyancy
of 300 pounds (140 kg).
Shipping Size / Weight
• Crate -
4 feet W X 6 feet L X 5 feet H (1.2 m x 1.8 m x 1.5 m) / 500 pounds (225 kg)
Exact weight and dimensions
varies dependent on machine configuration.
Chlorine Boosting -
Chlorine boost hose, accessible at top of reservoir spans down and connects to intake for fast
chlorine dispersion during in-reservoir boosting.
Accessories Available -
(1) Portable Disinfectant Boost System, (2) LED RPM Indicator (3) Supplemental Power Kit, and
(4) Wireless SCADA Kit.
© 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | [email protected]
Technical Data Sheet
SB500PWc
1234_10227_20200311
O&M_SB500PWc_10316_20210309a - 40
