Transportation and Assembly
30
Place the device on a solid working surface as shown in the picture (1), otherwise buzzing
and rattling noises will occur due to the vibration.
If placed on a surface with table legs, position the device precisely above the legs in order
to minimize vibration transmission.
In order to minimize the milling noise for the operator, do not position the device with the
maintenance access directly opposite the operator (2). Position the device in such a way
that the maintenance access is aligned parallel to the position of the operator (3).
Ensure the device is free-standing and easily accessible.
a.
Do not fix the device to cabinets or shelves.
b.
Do not operate the device on or under other equipment.
c.
Maintain a distance to other devices.
Risk of stumbling and falling! Avoid clutter in the workplace, keep the workplace clean,
safely store cables and peripheral equipment.
Avoid constant lopsided posture, set the workplace up ergonomically and ensure optimal
seat height, position and lighting.
1
2
3
Summary of Contents for PrograMill Base
