Ivoclar digital PrograMill Base, Operating Instructions Manual

Page: 107 / 144

Editing Milling Jobs
107
7.4 Starting individual milling jobs (Single mode)
In the main menu [Cases], tab [New], all milling jobs transmitted from the Ivoclar Digital
system solution to PrograMill One, which are waiting for processing, are displayed (“Tab
[New]”, page 57).
In the Single mode, individual milling jobs will be performed.
You can either insert the required block and the tool right now in advance or perform all
device- and milling job-related tasks after the start of the milling job with the help of the
Wizard.

The cleaning status of the unit is OK (“Cleaning and Maintenance Work for the User”,
page 125).

You are in the main menu [Cases] in the tab [New].
1. In order to start the milling jobs, tap on
the symbol in the status display:
The milling job is selected and marked
with
.
You can start the milling job in both tabs:
[New] or [Selected].
2. In order to start the milling job, tap on
the tab [Selected].
The milling duration is displayed.
3. Tap the icon in the status bar:
In case other device- or milling job-
related tasks are pending, the Wizard
will guide your through the respective
tasks.
As soon as all tasks are performed, the
milling job will start.