Ivoclar digital PrograMill Base, Operating Instructions Manual

Page: 132 / 144

Cleaning and Maintenance Work for the User
132
NOTICE! Contact with the membrane or the spindle when cleaning the milling chamber.
Damage of the membrane.
Damage of the spindle.

Do not touch the membrane or the spindle with the cleaning accessories.
5. Remove milling residues and coolant fluid from the milling chamber using a paper towel.
6. Dry the bottom of the milling chamber with a paper towel.
NOTICE! Residues enter the inside of the device.
Damage to the device.

Ensure that no residues enter the drainage of the device.
7. Carefully clean the drainage in the milling chamber with a cotton bud.
8. Release the lateral locks of the collection container and remove the cover from the
collection container.
9. Remove residues in the inside of the collection container using a plastic spatula and
dispose of according to local specifications (documentation on the blocks used,
“Supporting documents”, page 9).
10. Rinse the collection container and the cover under running water and dry with paper
towels.
11. Allow the cover to snap in place with the collection container.
12. Hold the collection container and the
cover in a slightly tilted position and
insert it into the milling chamber (1).
13. Shift the tilted collection container with
the cover over the spindle (2).
1. 1.