ITW Foxjet Marksman Elite User Manual Download Page 75

Page: 75 / 103

Section 7: Maintenance and Shutdowns

Marksman Matrix & Elite

2465-623 User Manual Rev F

Page 70

Ink Storage

Storage Life of a FACTORY SEALED Bottle of Ink

•

ScanTrue II: 12 months from date of manufacture.

•

ScanTrue II Plus: 18 months from date of manufacture.

•

Recommended storage temperature: 4° to 40°C (40° to 104°F).

•

Recommended storage relative humidity: 5 - 90% relative humidity with no condensa-
tion.

Temperatures above or below the recommended storage temperature for a period greater

than one week will reduce the storage life of the ink.

NOTE:

Do not shake the bottle of ink before use. Agitating the ink may introduce air into

the Print Head. If shaken, the bottle must sit for at least two hours before use.

Use Life of an OPENED Bottle of Ink

•

ScanTrue II: 3 months from opening.

•

ScanTrue II Plus: 6 months from opening.

Exposure to air, temperature and relative humidity will affect the useful life of the ink.

Summary of Contents for Foxjet Marksman Elite








































































































Search results

Summary of Contents for Foxjet Marksman Elite

Reviews:

Related manuals for Foxjet Marksman Elite

Brands by name

Popular brands

ITW Foxjet Marksman Elite, User Manual

Search results

Summary of Contents for Foxjet Marksman Elite

Reviews:

Related manuals for Foxjet Marksman Elite

Brands by name

Popular brands