ITW Foxjet Marksman Elite User Manual Download Page 52

Page: 52 / 103

Section 6: BoxWriter© Matrix & Elite Editor

Marksman Matrix & Elite

2465-623 User Manual Rev F

Page 47

Export

NOTE:

It is recommended that all printing tasks be stopped until the Export function has

been successfully completed.

To export all existing tasks,

choose

File

, then

Export

Input the name of the file to

export to, or browse for an exist-

ing file by clicking the

Browse

button. Click the

Export

button.

If the file already exists, the user

will be prompted to overwrite the

file or cancel the request.

If successful, a confirmation message will appear.

Delete

To delete existing tasks,

choose

File

> Delete

Select the task to be

deleted. Multiple tasks may

be selected by using the

control and/or shift keys.

When the selection has

been made, click

Delete

The delete function may be

used several times without

closing the window. Tasks

on other lines may also be

deleted.

Click

to save the

changes.

Checking the "Show pre-

view" box will show a pre-

view of the selected task.

For large tasks, it may take

several seconds to gener-

ate the preview.

Summary of Contents for Foxjet Marksman Elite








































































































Search results

Summary of Contents for Foxjet Marksman Elite

Reviews:

Related manuals for Foxjet Marksman Elite

Brands by name

Popular brands

ITW Foxjet Marksman Elite, User Manual

Search results

Summary of Contents for Foxjet Marksman Elite

Reviews:

Related manuals for Foxjet Marksman Elite

Brands by name

Popular brands