ITW Foxjet Marksman Elite User Manual Download Page 13

Page: 13 / 103

Section 2: Installation

Marksman Matrix & Elite

2465-623 User Manual Rev F

Page 8

Inks

Ink is supplied via 500 mL plastic containers. ScanTrue® II PLUS is a pigmented ink formu-

lated for use on porous substrates.

NOTE:

Check the label on the Print Head for correct ink type.

Waste Bottle

The APS includes a Waste Collection Bottle mounted on the rear of the Print Head assem-

bly. This bottle must be changed when full to prevent improper operation of the system.

Instructions for waste disposal are on the collection bottle.

Do not reuse waste ink; contaminants will reduce system lifespan.

Step 3: Mounting the Photosensor and Encoder

Photosensor

The photosensor is both a light source and a sensor. It emits light and detects the arrival of

a product when the product reflects the light source back to the sensor. The sensor then

sends a signal to the controller to start the printing cycle.
The product detect Photosensor should be mounted on either side of the print head so that

the product passes by the sensor before the print face. Remove the plugs or set screws (3/

32" hex head) in the photosensor mounting holes, then attach the Photosensor Mounting

Bracket with the 10-32 x 1/2" screws provided with the bracket.

Encoder

The encoder assembly provides conveyor line

speed information to the controller. It also allows

automatic disabling of printing when the line

stops.
The Marksman© Matrix & Elite System uses a

5000 ppr open collector output encoder. The

wheel is sized to provide the correct timing

inputs to allow the print heads to print from 150

to 300 dpi.

ENCODER ASSEMBLY

Summary of Contents for Foxjet Marksman Elite








































































































Search results

Summary of Contents for Foxjet Marksman Elite

Reviews:

Related manuals for Foxjet Marksman Elite

Brands by name

Popular brands

ITW Foxjet Marksman Elite, User Manual

Search results

Summary of Contents for Foxjet Marksman Elite

Reviews:

Related manuals for Foxjet Marksman Elite

Brands by name

Popular brands