ITW Foxjet Marksman Elite User Manual Download Page 99

Page: 99 / 103

Appendix K: Standard Operating Procedures

Marksman Matrix & Elite

2465-623 User Manual Rev F

Page 94

8. Remove all photosensors and photosensor brackets from the printhead, if applicable.

9. Remove screws that hold the printhead to the bracketry.

10. Wrap a clean shop cloth around the front of the printhead to catch any ink that may leak

out and secure the cloth with masking or packing tape.

11. Place a plastic bag over the printhead assembly and secure it with tape.

12. If the printhead is to be stored for later use, it should be stored in a cool, dry location.

13. If the printhead is to be shipped, it should be well padded and packed in its original

shipping box.

CAUTION:

Observance and practice of this procedure is critical to insure no damage occurs during

shipping.

FoxJet will replace, and charge for, any items found to be missing before it can be returned.

FoxJet may deny warranty coverage if the printer or part has failed as a result of abuse, ne-

glect, improper maintenance, improper shipping, or unapproved modification(s). Please re-

fer to the Master Warranty Statement.

END

Summary of Contents for Foxjet Marksman Elite








































































































Search results

Summary of Contents for Foxjet Marksman Elite

Reviews:

Related manuals for Foxjet Marksman Elite

Brands by name

Popular brands

ITW Foxjet Marksman Elite, User Manual

Search results

Summary of Contents for Foxjet Marksman Elite

Reviews:

Related manuals for Foxjet Marksman Elite

Brands by name

Popular brands