iTegno 39 series At Command Manual Download Page 52

Page: 52 / 278

iTegno 39XX GPRS Modem

AT Commands Guide

02000C17

•

v1.5

Confidential

All specifications are correct at the time of release. iWOW Connections owns the proprietary rights to the information contained herein this

Connections Pte Ltd

5.12

Disable Circuit Switching XCSPAGING

This command allows enable/disable the circuit switching paging. The command has an effect only when used

COPS or +CGATT.

•

Set command is used for enabling the circuit switching paging.

•

Test command returns the supported values of <mode>.

Syntax:

AT+XCSPAGING=<mode>

Command

Possible Responses

AT+XCSPAGING=<mode>

OK or

CME ERROR: <error>

AT+XCSPAGING=?

+XCSPAGING:( 0-1)

Defined values

<mode> type of preferred mode may be

circuit switched paging disabled(packet switched preferred)

circuit switched paging enabled

5.13

Select Phonebook Memory SCPBS

Description:

This command selects phonebook memory storage <storage>, which is used by other phonebook commands.

•

Set command selects phonebook memory storage <storage>, which is used by other phonebook

commands.

•

Read command returns currently selected memory.

•

Test command returns supported storages as compound value.

Syntax:

AT+CPBS=<storage>

Commands

Possible Responses

AT+CPBS=<storage>

[,<password>]

OK or +CME ERROR: <err>

AT+CPBS?

+CPBS: <storage>[,<used>,<total>] OK or +CME ERROR: <err>

Summary of Contents for 39 series























































































































































































































































































Search results

Summary of Contents for 39 series

Reviews:

Related manuals for 39 series

Brands by name

Popular brands

iTegno 39 series, At Command Manual

Search results

Summary of Contents for 39 series

Reviews:

Related manuals for 39 series

Brands by name

Popular brands