iTegno 39XX GPRS Modem
AT Commands Guide
02000C17
•
v1.5
Confidential
All specifications are correct at the time of release. iWOW Connections owns the proprietary rights to the information contained herein this
document. It may not be edited, copied or circulated without prior written agreement by iWOW Connections Pte Ltd. © 2011, 2012 iWOW
Connections Pte Ltd
70
6.11
Select Cell Broadcast Message Types +CSCB
Description:
This command selects which types of Cell Broadcast Messages are to be received by the ME.
•
Set command controls which CB messages are accepted and those that are rejected.
•
Read command returns currently selected mode value, message IDs and the language codes.
•
Test command returns supported modes.
Syntax:
AT+CSCB=[<mode>[,<mids>[,<dcss>]]]
Command
Possible Responses
AT+CSCB=[<mode>[,<mids>
[,<dcss>]]]
OK
or
+CMS ERROR: <err>
AT+CSCB?
+CSCB: <mode>,<mids>,<dcss>
OK
AT+ CSCB =?
+CSCB: (list of supported <mode>s)
OK
Defined Values
<mode>
control whether message types that are specified are going to be accepted or rejected
0
message types specified in <mids> and <dcss> are accepted. With mode as 0 and no other
poarmetrs areprovided it is equal to diabling the CBS.
1
message types specified in <mids> and <dcss> are not accepted
<mids>
string type; all different possible combinations of CBM message identifiers (refer <mid>)
Default is empty string.
e.g. “0,1,5,320-478,922”
<dcss>
string type; all different possible combinations of CBM data coding schemes (refer <dcs>)
Default is empty string.
e.g. “0-3,5”
