iTegno 39XX GPRS Modem
AT Commands Guide
02000C17
•
v1.5
Confidential
All specifications are correct at the time of release. iWOW Connections owns the proprietary rights to the information contained herein this
document. It may not be edited, copied or circulated without prior written agreement by iWOW Connections Pte Ltd. © 2011, 2012 iWOW
Connections Pte Ltd
103
+CLIP: “966666666”,129,1,,,,”815765767”
Note: Incoming call alert with presentation of phone number and name
Defined Values
<n>
(Parameter enables/disables the result code presentation status to the TE:
0
Disable
1
Enable
<m>
(parameter shows the subscriber CLIP service status in the network):
0
CLIP not provisioned
1
CLIP provisioned
2
unknown (e.g. no network, etc.)
8.2
Calling Line Identification RestrCLIR
Description:
This command allows controlling the calling line identification restriction supplementary service (GSM02.81).
•
Set command overrides the CLIR subscription (default is restricted or allowed) when temporary mode is
provisioned as a default adjustment for all following outgoing calls. This adjustment can be revoked by
using the opposite command. If this command is used by a subscriber without provision of CLIR in
permanent mode the network will act according 3GPP TS 22.081 [3].
•
Read command gives the default adjustment for all outgoing calls (given in <n>), and also triggers an
interrogation of the provision status of the CLIR service (given in <m>).
•
Test command returns values supported as a compound value.
Syntax:
AT+CLIR=[<n>]
Command
Possible Responses
AT+CLIR=[<n>]
OK
or
CME ERROR: <error>
AT+CLIR?
+CLIR: <n>,<m>
OK
AT+CLIR=?
+CLIR: (0,1,2)
