iTegno 39XX GPRS Modem
AT Commands Guide
02000C17
•
v1.5
Confidential
All specifications are correct at the time of release. iWOW Connections owns the proprietary rights to the information contained herein this
document. It may not be edited, copied or circulated without prior written agreement by iWOW Connections Pte Ltd. © 2011, 2012 iWOW
Connections Pte Ltd
127
8.19
Calling Name PresenCNAP
This command allows controlling the name identification supplementary service. When the presentation of
CNAP at the TE is enabled, the following unsolicited result code is displayed:
+CNAP: <calling_name> [, <CNAP This command allows controlling the name identification supplementary
service. When the validity>]
•
The set command enables/disables the presentation of the calling name
•
Read command gives corresponding setting value of <n> and <m>
•
Test command returns values supported as a compound value
Syntax:
This command allows controlling the name identification supplementary service. When the
AT+CNAP = [<n>]
Command
Possible Responses
AT+CNAP=[<n>]
OK
or
CME ERROR: <error>
AT+CNAP?
+CNAP: <n>,<m>
OK
AT+CNAP=?
+CNAP: (0-1)
i.e. +CNAP: (list of supported <n>s)
OK
Defined Values
<n> parameter sets the result code presentation in the TA
0
=
disable
1
=
enable
<m> parameter shows the subscriber CNAP service status in the network and may be
0
=
CNAP not provisioned
1
=
CNAP provisioned
2
=
unknown
<calling_name> string type containing the calling party name
<CNAP validity> may be
0
=
name presentation allowed
1
=
presentation restricted
2
=
name unavailable
3
=
name presentation restricted
