iTegno 39XX GPRS Modem
AT Commands Guide
02000C17
•
v1.5
Confidential
All specifications are correct at the time of release. iWOW Connections owns the proprietary rights to the information contained herein this
document. It may not be edited, copied or circulated without prior written agreement by iWOW Connections Pte Ltd. © 2011, 2012 iWOW
Connections Pte Ltd
228
15.18
3G Quality of Service Profile (Requested) +CGEQREQ
This command allows the TE to specify a UMTS Quality of Service Profile that is used when the MT sends an
Activate PDP Context Request message to the network.
• Set command specifies a profile for the context identified by the (local) context identification parameter,
<cid>. The specified profile will be stored in the MT and sent to the network only at activation or MS-initiated
modification of the related context.
• Read command returns the current settings for each defined context.
• Test command returns values supported as a compound value. If the MT supports several PDP types, the
parameter value ranges for each PDP type are returned on a separate line.
Syntax:
AT+ CGEQREQ
Command
Possible Responses
Set Command
AT+CGEQREQ=[<cid> [,<Traffic class>
[,<Maximum bitrate UL>
[,<Maximum bitrate DL>
[,<Guaranteed bitrate UL>
[,<Guaranteed bitrate
DL> [,<Delivery order> [,<Maximum
SDU size>
[,<SDU error ratio> [,<Residual bit
error ratio>
[,<Delivery of erroneous SDUs>
[,<Transfer
delay> [,<Traffic handling priority>
[,<Source
statistics descriptor> [,<Signalling
indication>]]]]]]]]]]]]]]]
OK
ERROR
Read Command
AT+CGEQREQ?
+CGEQREQ: <cid>, <Traffic class> ,<Maximum bitrate UL>
,<Maximum bitrate DL> ,<Guaranteed bitrate UL>
,<Guaranteed bitrate DL> ,<Delivery order> ,<Maximum SDU
size> ,<SDU error ratio> ,<Residual bit error ratio> ,<Delivery
of erroneous SDUs> ,<Transfer delay> ,<Traffic handling
