iTegno 39XX GPRS Modem
AT Commands Guide
02000C17
•
v1.5
Confidential
All specifications are correct at the time of release. iWOW Connections owns the proprietary rights to the information contained herein this
document. It may not be edited, copied or circulated without prior written agreement by iWOW Connections Pte Ltd. © 2011, 2012 iWOW
Connections Pte Ltd
208
15.6
Define Secondary PDP CCGDSCONT
This command is used to define a secondary PDP context by specifying the PDP context parameter values for a
<cid> (local context identification parameter). If the command is used only with the one parameter <cid>, it
means that the corresponding PDP context becomes undefined.
• Set command specifies PDP context parameter values for a Secondary PDP context identified by the (local)
context identification parameter, <cid>.
• Read command returns the current settings for each defined context.
• Test command returns values supported as a compound value.
Syntax: AT+CGDSCONT= [<cid>, <p_cid> [, <d_comp> [, <h_comp>]]]
Command
Possible Responses
+CGDCONT=[<cid>, <p_cid>
[,<d_comp>
[,<h_comp>]]]
OK
Or
ERROR
+CGDSCONT?
+CGDSCONT: <cid>, <p_cid>, <d_comp>, <h_comp>
OK
+CGDSCONT=?
+CGDSCONT: (range of <cid>s),(list of <cid>s for
defined primary contexts),<PDP_type>,,,(list of
supported
<d_comp>s),(list of supported <h_comp>s)
OK
Defined Values
<cid> (PDP Context identifier)
It is a numeric parameter, which specifies a particular PDP context definition. The parameter is local to the
TEMT interface and is used in other PDP context-related commands. The range of the permitted values
(minimum value = 1) is returned by the TEST command.
<p_cid> (Primary PDP context identifier)
It is a numeric parameter which specifies a particular PDP context definition which has been specified by use of
the +CGDCONT command. The parameter is local to the TE-MT interface. The list of permitted values is
returned by the test form of the command.
<d_comp> (a numeric parameter that controls PDP data compression (applicable for SNDCP only))
