•
When setting the trigger source for data logging, select the
DLogTrig Source
menu item.
•
The List trigger source set here is also valid for triggering other functions in
the
Function
menu.
3. Press the Left / Right key or turn the knob to adjust the value of this
parameter.
4. After the parameter settings are complete, press
[Enter]
.
6.9 Set the Communication Information (I/O Con)
This menu item is used to set the communication information between instru-
ment and PC. The standard communication interfaces for IT6000B series power
system are USB, LAN, CAN and VCP. You can also select the non-standard in-
terface GPIB or RS-232 based on personal requirement.
The procedures to set the menu item are as follows.
1. Press the composite keys
[Shift]+[P-set]
(System) on the front panel to en-
ter the system menu.
2. Press the Up/Down key or turn the knob to select the
I/O
and press
[Enter]
.
3. Press the Left / Right key or turn the knob to adjust the value of this
parameter.
4. After the parameter settings are complete, press
[Enter]
.
•
The default communication method is USB. If other communication method
is selected, the related parameters need to be set. For detailed parameter
description, refer to
2.6 Remote Interface Connection
•
The instrument supports the non-standard RS-232 and GPIB interfaces, and
the configuration items in the menu are dynamically displayed according to
the interface user selected.
6.10 Set Parallel Operation Mode (Parallel)
This menu item is used to control whether the instrument is working in single
mode or in parallel mode. This chapter takes three instruments (with operation
panel) as an example to describe how to parallelize the single units and how to
return from parallel mode to single mode.
Copyright © Itech Electronic Co., Ltd.
181
Summary of Contents for IT6000B Series
