How to Use
Recall the self-defined DIN waveform operation (taking 12.5V voltage waveform
as an example):
1. Press the composite keys
[Shift]+[I-set]
(Function) on the front panel to en-
ter the function menu.
2. Use the knob or press the Up/Down key to select
3.Road-Vehicles = Off
and press
[Enter]
.
3. Press the Left/Right key to select
DIN40839
and press
[Enter]
.
4. Press the Left/Right key to select
User-defined
and press
[Enter]
.
5. Set the startup voltage as
V=12.5V
and press
[Enter]
.
The interface returns to the main interface of the system and displays
DIN40839
.
6. Press
[On/Off]
on the front panel to turn on the output.
7. According to the selected trigger method (same as the trigger method of the
LIST function), for example, press
[Shift]+[On/Off]
(Trigger) to trigger the
output of the waveform.
4.6.3.2 Simulate the Waveform to Verify the Anti-interference
Performance of the Automotive Electronics’ Products
To verify the anti-interference performance of the automotive electronics’ prod-
ucts. Output pulse waveform completely meets the International Standard ISO-
16750-2, convenient for quick recall by the user.
ISO16750-2
Simulate the waveform to verify the anti-interference per-
formance of the automotive electronics’ products.
Short-Drop
Automotive short-time voltage drop
waveform
Copyright © Itech Electronic Co., Ltd.
86
Summary of Contents for IT6000B Series
