Flag
Function
Description
Flag
Function Description
CC
Source
mode: The
power supply is in a
state of constant
current output.
Load
mode: The
load is in a state of
constant current
input.
Addr
When received command
successfully, the flag will
display 3 seconds.
*
The keyboard lock
is turned on.
Rmt
Indicates that the instrument
is working in remote control
mode.
CR
Source
mode: The
power supply (Sink)
is in constant resist-
ance state.
Load
mode: The
load is in constant
resistance state.
Error
Error occur
Shift
Using composite
function key
Prot
The instrument enters the
protection state.
SRQ
Indicates that the
internal status re-
quest event occurs.
Trig
The instrument is in a state
of waiting for a trigger.
CW
Source
mode: The
power supply is in a
state of constant
power output.
Load
mode: The
load is in a constant
power input state.
-
-
1.7 Configuration Menu Function
This section gives an overview of the configuration menu of the IT6000B series
power system.
Copyright © Itech Electronic Co., Ltd.
10
Summary of Contents for IT6000B Series
