© Isothermal Technology
Page 86 of 102
923 milliK manual - issue: 1.10
A detailed description of each command follows:
8.6.5 Command: *IDN?
Format: *IDN?
Reports information on the milliK in 4 comma separated fields:
manufacturer
model
serial number
firmware version
Example: for a milliK with serial number ITL12345 using software version 1.22.33, the
milliK responds to *IDN? with:
Isothermal Technology,milliK,ITL12345,1.22.33
8.6.6 Command SENSe:FUNCtion[:ON]
Format: SENSe:FUNCtion[:ON]
<function>
Selects the measurement function. The parameter
<function>
must be one of the following
valid SCPI parameters:
RESistance
VOLTage[:DC]
CURRent
Example: to set the milliK to measure resistance, use:
SENS:FUNC RES
8.6.7 Command SENSe:FUNCtion[:ON]?
Format: SENSe:FUNCtion?
Reports the present measurement function (RESISTANCE,VOLTAGE or CURRENT).
Example: a milliK set to measure voltage will respond to
SENS:FUNC?
with “VOLTAGE”.
8.6.8 Command SENSe:CHANnel
Format: SENSe:CHANnel
<channel>
