© Isothermal Technology
Page 15 of 102
923 milliK manual - issue: 1.10
The ‘Samples/Reading’ setting is initially set to 1 but can be increased to a maximum of 100.
This will cause the milliK to take the specified number of samples for each reading and will
reduce the noise at the expense of slower measurement speed.
2.2.4 The ‘Instrument’ Window
In the ‘Instrument’ Window you can access the milliK’s database of thermometers, perform
maintenance tasks (such as backing up, clearing or restoring information stored to internal
memory, updating software, calibrating your milliK), change the IP
address/passwords/date/time settings and define temperature profiles you wish to use when
calibrating thermometers with your Isotech temperature source:
Use the
↑
↑
↑
↑
↓
↓
↓
↓
keys to select the required function and then press the
↵
↵
↵
↵
key to open a new
Window to access that function. Some functions are password protected, in which case a soft
keyboard will appear and you will be asked to enter the password before proceeding:
