© Isothermal Technology
Page 50 of 102
923 milliK manual - issue: 1.10
temperature source. Restart the milliK (cycle the power or use the “Restart/Update Software”
button in the ‘Instrument’ Window) with the lead connected and the temperature source
powered to establish a connection. The milliK will then add buttons at the bottom of the
‘Settings’ Window to allow you to select a temperature profile:
The ‘Setpoint Temp’ button allows you to select a temperature profile (or disable this feature
by selecting “None”). Temperature profiles can be created in the ‘Instrument’ Window (see
section 3.12.1). Use the
↑
↑
↑
↑
↓
↓
↓
↓
keys to select the ‘Setpoint Temp’ button and press the
↵
↵
↵
↵
key to
open the ‘Setpoint List’ Window:
Use the
↑
↑
↑
↑
↓
↓
↓
↓
keys to select the required profile or select “None” to disable sequencing of the
temperature set point, then press the
OK
(F4) key. If the profile has been configured to start
“Immediately” then when you press the
OK
(F4) key the first set point will be sent to the
temperature source. Otherwise, (if the profile has been configured to start “On Save”) the first
