Isotech milliK User Maintenance Manual/Handbook Download Page 34

Page: 34 / 102

Page 34 of 102

923 milliK manual - issue: 1.10

Press the

↵

key to open a numeric keypad Window and set the required value (between 1 and

1000).

The rolling statistics can be cleared in the

Numeric

Window. Use the

←

→

keys to select

the

Clear Statistics

button and then press the

↵

key to clear the statistics:

3.8 Logging Results to a File

The milliK can store results to a file on an external USB drive (connected to the USB port on

the rear of the instrument) or to internal flash memory. Files stored to internal memory can be

transferred to an external USB drive at a later date. The information is stored as comma

separated (CSV) ASCII text, which can be imported into applications such as Microsoft

Excel™ for further processing. Start or stop the logging of data from within the

Graph

Numeric

Windows by using the

←

→

keys to select the

Start Save

Stop Save

button

and then pressing the

↵

key:

Summary of Contents for milliK







































































































Search results

Summary of Contents for milliK

Reviews:

Brands by name

Popular brands

Isotech milliK, User Maintenance Manual/Handbook

Search results

Summary of Contents for milliK

Reviews:

Brands by name

Popular brands