Isotech milliK User Maintenance Manual/Handbook Download Page 25

Page: 25 / 102

Page 25 of 102

923 milliK manual - issue: 1.10

Once you have configured the milliK to work with your thermistor, press either the

Graph

(F1) or

Numeric

(F2) keys to view the measurements:

Use the

←

→

↑

↓

↵

keys to select and activate the on-screen buttons to clear the

graph/statistics, set the scales and start/stop logging of data to a file.

3.3 Using a Thermocouple with milliK

The milliK can be used with any thermocouple (calibrated or uncalibrated) fitted with a

standard miniature thermocouple connector. Connect your thermocouple to either of the

miniature thermocouple connectors on the front panel. Ensure that the Lemo circular

connector for the same channel is unused (since it is connected in parallel with the

thermocouple connector). Isotech supply thermocouples fitted with standard miniature

thermocouple connectors for direct connection to your milliK.

Summary of Contents for milliK







































































































Search results

Summary of Contents for milliK

Reviews:

Brands by name

Popular brands

Isotech milliK, User Maintenance Manual/Handbook

Search results

Summary of Contents for milliK

Reviews:

Brands by name

Popular brands