IPX DDK-1200 Installation & Operation Manual Download Page 49

Page: 49 / 108

5.1.5 Change the Application Setting

Please follow the steps below to change the application setting through the network if necessary.

Change the Application Setting — SD Card Application Setting.

Please follow the steps below to change the SD CARD setting via the network if necessary to upload

recording data live. Click the

SD card

button on the top left to enter the “SD Card Application Setting”

page.

SD Card setting page of MJPEG mode

SD Card setting page of MPEG4 mode

You have an option as to which SD - card storage format to use, the MJPEG (MJPEG mode only)

or the AVI. Click your selected format and click "Submit" to set it.

If it's MJPEG you want, fill in the "Max MJPEG Numbers" entry.

If AVI is your choice, enter its recording rate and duration in seconds, and click "Submit" for their

setting.

Description of function keys:

MJPEG Format:

One image per file.

Max MJPEG Numbers:

Sets the number of file sequences you can save per second.

AVI Format audio setting:

Unlike a single – image file, this option offers a selected section of a video

record.

Recording Rate:

Sets your chosen frame rate of frames per second.

AVI Duration:

Predetermines the length of each video file in terms of seconds.

Enable SD Card Rewrite:

Tick to activate the SD card rewrite function.

SD Card Capacity:

The free capacity of the SD card.

SD Card Usage:

The percentage of the recorded file on the SD card.

: Click and press the Yes button to format the SD card.

Summary of Contents for DDK-1200













































































































Search results

Summary of Contents for DDK-1200

Reviews:

Related manuals for DDK-1200

Brands by name

Popular brands

IPX DDK-1200, Installation & Operation Manual

Search results

Summary of Contents for DDK-1200

Reviews:

Related manuals for DDK-1200

Brands by name

Popular brands