28
5.1.2 Change Image Setting
Please follow the steps below to change the image setting through the network if necessary.
1. Click the
Image
button on the home page to enter the image-setting page.
Image setting page of MJPEG mode
Image setting page of MPEG4 mode
2. Adjust the image setting including “Device Title”, “Resolution”, “Quality”, “Frame rate”
(MPEG4 mode only), “Format”, and “Viewer Type” (MJPEG mode only) if necessary.
3. Click the
Submit
button to submit the new image setting.
4. Click the
Fine Tune
button to enter the Image Fine Tune page to set the details of the device
including: “Brightness”, “Saturation” and “Sense Up”. Click the
Default
button to reset all the
settings.
NOTE: The revised image will appear immediately after any change in made.
5. Click the
Privacy Mask
button to enter the Privacy Mask page.
Summary of Contents for DDK-1200
Page 2: ......
Page 106: ...104 Figure 6 ...
