IPX DDK-1200 Installation & Operation Manual Download Page 64

Page: 64 / 108

5.2.4 Operation

5.2.4.1 Live Monitor

Once the connection has been established, click the

button to enter the Live Monitor

window. (See the sample screen below.) On the left side of the

window

is the connected

device that has been arranged when you established the connection.

The Live Monitor icon.

◇

Add a camera video onto the Live Monitor area:

(1) Click on the title of the camera that was connected.

(2) Hold down the right mouse button and drag onto the droppable Live Monitor area.

The video from the new camera will be displayed.

(3) In the Live Monitor area, if you want to exchange the videos of different cameras,

you can drag the video and drop it where you want to locate the video.

The Split-Screen display function bar: This allows you to display the connected device in

the single channel and multi-format screens.

The Sequence configuring button: Press to enter the sequential jumping mode, each

Summary of Contents for DDK-1200













































































































Search results

Summary of Contents for DDK-1200

Reviews:

Related manuals for DDK-1200

Brands by name

Popular brands

IPX DDK-1200, Installation & Operation Manual

Search results

Summary of Contents for DDK-1200

Reviews:

Related manuals for DDK-1200

Brands by name

Popular brands