IPX DDK-1200 Installation & Operation Manual Download Page 68

Page: 68 / 108

NOTE:

To view the alarm lists of a camera which were recorded, please (1) click the

icon

(2) the Alarm List window will appear as shown below, (3) select a camera from the

drop-down list, then (4) click the “Search” button.

Move to the left/right area.

Recorded video list box. This box allows you to access all recorded video, which are

stored in the HDD of the connected devices.

Playback function bar.

Play - Click to a recorded video from the PLAY LIST.

Stop - Click to stop playing back a recorded video or cease recording.

Pause - Click to freeze the image.

Step - Click to view images picture-by-picture.

Zoom in – Enlarges the displayed image.

Zoom out - Narrows the displayed image.

Capture / Print: Provides the image capturing and printing functions.

Summary of Contents for DDK-1200













































































































Search results

Summary of Contents for DDK-1200

Reviews:

Related manuals for DDK-1200

Brands by name

Popular brands

IPX DDK-1200, Installation & Operation Manual

Search results

Summary of Contents for DDK-1200

Reviews:

Related manuals for DDK-1200

Brands by name

Popular brands