IPX DDK-1200, Installation & Operation Manual

Page: 8 / 108

6
Image sensor:
‧
1/3 inch Sony Super HAD CCD sensor.
‧
MPEG4 resolution (pixels): 640 x 480, 320x240
Exposure:
‧
Automatic AGC.
‧
White Balance: Indoor installation.
‧
Exposure times: 1/60-1/100,000s.
Sensitivity:
‧
Minimum Illumination: 0.5 Lux. F1.2
Image:
‧
Image frame rate: up to 30 frames/second.
‧
Supports two compression modes, the Motion - JPEG and the MPEG4.
‧
5 levels of compression provided. The file size of an M-JPEG compressed image depends
on the image’s actual content. Images with a lot of detail will generate bigger files. The
level of compression determines the image quality. High compression requires smaller
files while low compression gives you finer image quality along with bigger files. The
table below contains the average file size in Kbytes, derived from real life tests.
General I/O:
‧
Input/Output connector to trigger the camera vis-a-vis external events, for instance a door
sensor with a solenoid.
System Requirements:
‧
Compatible with operating systems such as Windows 2000 and Windows XP.
‧
Internet Explorer 6.x.
‧
Non-network modem installation needs Windows PC.
Supported Protocols:
‧
TCP/IP, DHCP, HTTP, UDP, SNTP, ICMP, DDNS, DNS, UPnP
Security:
‧
Password protection available, unless exposure is preferred.
Connections:
‧
RJ 45 twisted pair cable, 10/100 mbit Ethernet network connection.
‧
Modem connection: RS-232 modem connector for dial-up use. Supports most V90
modems.
‧
Input/Output connector to trigger the camera vis-a-vis external events.