IPX DDK-1200 Installation & Operation Manual Download Page 44

Page: 44 / 108

Change the System Setting — Audio Mechanism.

Please follow the steps below to change the Audio Mechanism through the network if necessary.

1. Click

the

Audio Mechanism

button on the left side of the “Date and Time” page to enter the “Audio

Mechanism Setting” page.

Mark the “Audio Mechanism” “ON” or “OFF”.

3. Click

the

Submit

button to submit the new user’s settings.

4. Click

the

Home

button to return to the home page.

NOTE

This setting is for turning the audio mechanism of the Camera on/off automatically.

The Live audio service is only provided in the MPEG4 mode via the Web browser.

Description of function keys:

Audio Mechanism:

Select “ON” or “OFF” to activate or deactivate the function.

Summary of Contents for DDK-1200













































































































Search results

Summary of Contents for DDK-1200

Reviews:

Related manuals for DDK-1200

Brands by name

Popular brands

IPX DDK-1200, Installation & Operation Manual

Search results

Summary of Contents for DDK-1200

Reviews:

Related manuals for DDK-1200

Brands by name

Popular brands