IPX DDK-1200 Installation & Operation Manual Download Page 47

Page: 47 / 108

Change the System Setting — Update Firmware.

Please follow the steps below to change the Audio Mechanism through the network if necessary.

1. Click

the

Update Firmware

button on the left side of the “Date and Time” page to enter the “Update

Firmware” page.

Click the “Browse…” button to select the UPDATE.BIN file which was copied into your computer.

Click the “Update” button.

DO NOT power off the Ipxcam while this update process is running.

Note: Don’t interrupt the process while the unit is updating itself.

Note: Please make sure that the UPDATE.BIN file is fit in with the model of the unit. Updating

with the wrong UPDATE.BIN file may cause any physical damage to the device.

Summary of Contents for DDK-1200













































































































Search results

Summary of Contents for DDK-1200

Reviews:

Related manuals for DDK-1200

Brands by name

Popular brands

IPX DDK-1200, Installation & Operation Manual

Search results

Summary of Contents for DDK-1200

Reviews:

Related manuals for DDK-1200

Brands by name

Popular brands