iPECS LDP-9008D User Manual Download

Page: 3 / 192

LDP-9030D Digital Telephone Description Quick Guide

Fixed Feature button definition

Button

Description

3 Soft

Used in conjunction with fixed and flexible features, and the function changes in
relation to call progress, as indicated on the LCD display.

Page

Used to change more additional functions on the LCD display .

Trans/PGM

This button is used to initiate a call transfer (TRS) or to enter programming mode
(PGM).

Speed

Used to access speed dialing, speed programming, save number redial, and last
number redial.

DND

The DND (Do Not Disturb) feature blocks all incoming calls. When DND is active,
the red LED in this button is illuminated.

Voicemail/

Call Back

This is your voicemail button. It also functions as a station call back.

Mute

Toggle outgoing audio; red LED illuminates.

Volume

The volume button adjusts the audio levels for ringing, handset and
speakerphone functions.

Speaker

Speaker toggles the speakerphone state, and the red LED is illuminated when
the speakerphone is active.

Hold/Save

This button is used to put a call on hold or save information when programming

Hold/Save

This button is used to put a call on hold or save information when programming.

Flexible

Some flexible buttons are pre-programmed in the system for line appearances,
loop functions etc. The remaining flexible buttons can be user-programmed.

Visual Ringing LED

Illuminates when the phone is ringing.

LCD Display

Displays information about telephone status, dialing directories,and test message
information.

Hands-free Microphone

Microphone is used for hands-free speakerphone function.

Summary of Contents for LDP-9008D

































































































































































































Search results

Summary of Contents for LDP-9008D

Reviews:

Related manuals for LDP-9008D

Brands by name

Popular brands

iPECS LDP-9008D, User Manual

Search results

Summary of Contents for LDP-9008D

Reviews:

Related manuals for LDP-9008D

Brands by name

Popular brands